ABOUT PROTECH-ENGINE
- The PROTECH, engine coating treatment, is more effective when used from a new car.
- The PROTECH can maintain the engine condition of a new car for a longer period of time.
- The PROTECH can be used regardless of the time of changing oil, but it is more effective if you use it when changing.
- In the case of vehicles traveling within 1,000 km after changing the engine oil, only add it.
- However, if it is driven longer than that, use the PROTECH when changing the oil.
- The PROTECH does not contain any solid substances that may cause adverse effects on the engine.
- Particularly P.T.F.E (Teflon) - based material blocks the filter and prevents the smooth flow of oil.
- The PROTECH made ionic bonding between metals possible using a new material blending technique.
- The PROTECH, which became a part of the metal, does not change the thickness of the metal and does not damage the engine.
- PROTECH is already a well-established product among heavy equipment and huge truck users in Korea.
- It is not only because of the quality of the product but also because of the reasonable price.
- We maintain reasonable prices by reducing unnecessary advertising costs.
- Yes, you can.
- PROTECH recommended addition ratio is 6-13%.
- 75 ml is the minimum recommended rate of 6% applied to the 1.2L engine. (1,200ml * 0.06 = 72ml)
- This means that a minimum of 75 ml PROTECH is sufficient for the 1.2 liter engine.
- However, applying the maximum recommended ratio to the 0.8 liter engine results in 104ml.
- Therefore, you can use 100ml products for 0.8L engines as well, rather you can get better results.
- Of course, there is no problem with using it. Rather, it is positive in terms of cost reduction.
- Put 8 ~ 13% of Engine Oil Capacity.
- Injector clogging caused by fuel self-deposition is common.
- Normal emissions are invisible and transparent.
- If there is a dark emission, you should suspect the condition of the engine.
- One of the biggest reasons for this is incomplete combustion due to faulty injectors such as clogging.
- Do you see any noticeable smoke coming out of the car's exhaust? Clean the injector with the PROSHOT Fuel System Cleaner.
- The PROSHOT is a fuel system cleaner with excellent performance.
- Unlike other fuel system cleaners, the PROSHOT has the ability to remove moisture from the inside of the fuel tank.
- The PROSHOT contains the octane booster (gasoline) and the cetane booster (diesel) that increase fuel performance.
- Moisture may be caused by temperature differences between inside and outside the fuel tank.
- Moisture can occur in the fuel line even in summer weather with high humidity and heavy rains.
- Moisture from inside the gas station tank may also be introduced.
- When moisture inside the fuel tank flows into the engine, it may cause engine shaking and incomplete combustion. Diesel engines can cause engine outages.
- Moisture in the fuel causes rust in the fuel system and leads to serious conditions requiring the injector to be replaced.
- The PROSHOT continuously decomposes moisture to support the complete combustion of fuel, which helps improve engine performance.
- The PROSHOT not only removes moisture in the fuel but also prevents rust by forming an anti-corrosive film on the metal surface.
- As mentioned above, dark emission means that substances harmful to the human body, such as hydrocarbons, carbon monoxide, and nitrogen compounds, are discharged above the standard level.
- The PROSHOT eliminates injector clogging, which is a major cause of incomplete combustion, reducing human hazardous emissions by 19.7%.
- Of course, there is no problem with using it. Rather, it is positive in terms of cost reduction.
- Be sure to use Gasoline PROSHOT (Red Box). Never for Diesel (Yellow Box).
- Inside the engine, oil becomes carbon sludge by high-temperature, high-pressure combustion gases.
- Carbon sludge is non-adhesive and is largely filtered by oil strainers and oil filters.
- However, about 20% of the carbon sludge sticks to the aluminum surface inside the engine to form a mass of sludge.
- This sludge mass is not removed by a simple engine oil change.
- The most reliable method is to break down the engine and remove visible sludge mass by mechanical or chemical means.
- However, this method is difficult in terms of cost and time.
- If you use CLEANTECH every engine oil change cycle, there is no reason to clean the engine at a high cost.
- Of course, there is no problem with using it. Rather, it is positive in terms of cost reduction.
- Put 10% of Engine Oil Capacity.
- DPF stands for diesel particulate filter. It is a filter that captures and stores exhaust soot (some refer to them as soot traps) to reduce emissions from diesel cars.
- The Euro emission standards seek to limit the toxic gas in vehicles to attain cleaner air.
- Euro 5 exhaust emissions legislation introduced in 2009 to help lower car CO2 emissions effectively made DPFs mandatory. And since then, around one in two new cars a year have been diesel-powered.
- For your information, the Philippines follows EURO 4 emission standard as of the 1st of January, 2018. However, if the country that produces the car follows EURO 5 or higher standards, it is highly likely your unit has DPF.
- Check the manual for your unit.
- Please refer to the list we provide.
- For more information, contact the manufacturer's service center.
- Yes. Generally, warning lights come on if there is a problem with DPF. But DPF warning lights of some vehicles produced based on Euro 5 rather than Euro 6 might not work.
- General Sign:
- Loss of power
- Reduced fuel economy
- Poor throttle response
- Excessive exhaust fumes
- A hot and pungent odor from the engine
- Specific Sign:
- The engine warning lamp is illuminated.
- There is a limit to speed max. of 60 ~ 80km/h.
- The gear change is restricted.
- DPF Cleaning: Disassemble the DPF and clean it with a specialized chemical which usually costs more than 12,000 Philippine Pesos.
- Replace DPF: When the condition of DPF is serious that cleaning cannot resolve it, we recommend replacing it. The replacement may cost more than 60,000 Philippine Pesos.
- Our Best Recommendation: It's simple! At a gas station, you put a PROSHOT DPF Cleaner in the fuel tank, fill it up, and drive safely.
- It restores and improves the performance of DPF. It can restore under low-temperature conditions.
- It cleanses the EGR and turbochargers, the gas passway of hot exhaust gas.
- It reduces exhaust SOOT by cleaning sediment in injectors.
- It is because there is no need to disassemble the part! Restoration of function only with this additive(DPF Cleaner) without disassembling DPF when the DPF occupation indicator turns on.
- It is also low-cost!!! Save as little as P10,000 by simply using this product.
- We recommend every 5,000km.
- As described above, when the temperature inside the transmission increases due to friction, the oil is oxidized and oil foaming occurs.
- PROTECH ATF reduces mechanical friction inside the transmission to almost zero.
- The oil change cycle of the automatic transmission is 40,000 to 50,000 km.
- If the oil change period remains long, add PROTECH ATF to the transmission oil dipstick hole.
- If the transmission fluid change time has arrived or is exceeded, add it while changing the fluid.
- At this time, we recommend changing the oil pan and filter together.
- Adding PROTECH ATF to power steering oil helps improve performance.
ABOUT PROTECH-WATER
- Water supplied from outside the house to the inside is the root cause.
- Soil and rust accumulated in the pressure tank for a long time.
- Rust and scale piled up inside old steel water pipes.
- The 3,000 liters provided for home use and the 1,000 liters provided for restaurants are the right amounts to use without any problems considering the water quality in the Philippines.
- The purpose of this water purifier is to improve the quality of water supplied to each home or restaurant to the level of advanced countries that have no hygiene problems.
- Since the water purifier filter provided has a 0.01-micrometer filtering capability, the water passing through the water purifier does not have a major drinking problem according to international standards, but it is not recommended to actually drink it.
- It is recommended that you install a separate water purifier for drinking.
- The quality of tap water supplied to each household is not suitable for use with international standard drinking water purifiers.
- Even if used, the filter cannot cover the amount of various impurities, so it cannot be expected to function properly.
- If you want to use a drinking water purifier safely, we recommend that you install our product to make the water clean before using it.
- Yes, there is no problem with drinking water obtained through the WFP-2030/2030S water purifier.
- However, considering the water quality supplied, there is a problem with filters needing to be replaced more often than recommended for hygiene and safety.
- To solve this problem, we recommend installing the PVDF water purifier together.
- Remove 99.9% of harmful substances such as E. coli and Staphylococcus aureus that may occur in the tank by sterilizing the stainless tank containing purified water using a UV lamp.
- It prevents energy waste by blocking the hot water function at night using a light sensor.
- It has a cold and hot water switch to block functions as needed and reduce unnecessary energy consumption.
- To minimize bacterial contamination caused by external air contact, HYGIENE GUARD made of antibacterial ABS material is designed to be easily rotated and exchanged.
- It is a finished product equipped with filters and fittings inside the water purifier.
- Filter flushing must be done separately during installation.
- Yes, there is no problem with drinking water obtained through the WPU-3205 water purifier.
- However, considering the water quality supplied, there is a problem with filters needing to be replaced more often than recommended for hygiene and safety.
- To solve this problem, we recommend installing the PVDF water purifier together.
- It is a direct water purifier that does not provide cold and hot water.
- Height : 105mm
- Length : 205mm
- Installation is simple as long as you attach the adapter and flush the filter.
- Accessories such as fittings, tubing hoses, and faucets are consumables.
- If used for a long time, it is recommended to replace it every one to two years because there is a risk of water stains and leakage inside.
- Long-term storage is possible if water is not passed through the filter.
- Avoid direct sunlight and store in a cool place that is not humid.
- The date written on the filter is its date of manufacturing.
- Flushing is the process of removing air and various components (carbon, film preservation liquid) from the inside using water.
- For effective flushing, each filter must be carried out.
- The 1st, 3rd and alkaline filters are made of activated carbon material, so activated carbon dust may come out during initial installation or replacement.
- Flushing is performed until no black water or black powder is produced.
- It is more effective if you use a tool such as a spoon to lightly tap the filter and flush it.
- Drinking water mixed with black powder is harmless to the human body.
- The first time you install the filter, the remaining air inside the filter comes out with water.
- In addition, the carbon dust in the filter can come into contact with water and form white fine bubbles, which is a natural phenomenon.
- For direct water purifiers, symptoms disappear when the inside of the filter is filled with water.
- For cold water purifiers, bubbles disappear while water is stored in the reservoir.